Caudata.org: Newts and Salamanders Portal

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Did you know that registered users see fewer ads? Register today!

Question: Testing the water

Guardianangel69

New member
Joined
Apr 7, 2013
Messages
40
Reaction score
0
Location
Brantford, ontario
I'm nwe to testing the water. My ph was sky high, so I removed everything and the sand. I bought api 5 in 1 test strips as the liquid kit wasn't available. I followed the directions, and waited 30 seconds to read the results. When I checked the results were between 7.5 and 8, which I believe is ideal, but when I checked again about a minute later, the strip was darker. Which result is accurate, the one taken after 30 seconds, or the one read a minute later?

Sent from my ST26a using Tapatalk
 

HayleyK

New member
Joined
Jun 21, 2013
Messages
1,199
Reaction score
16
Location
Sydney
It depends what the manufacturers advise. My tests take 5 minutes to develop.

Also if you're using test strips i nstead of liquid it can be ALOT more innaccurate. Liquid testing kits may be more expensive however they are worth while and last a long time.
 

keiko

New member
Joined
Mar 27, 2014
Messages
774
Reaction score
19
When you use test strips it is extremely important to read the instructions and do exactly what it says. If the instructions say you need to wait a minute and then check the results, you get a stopwatch to see exactly when it has been 60 seconds. Even a few seconds can be a huge difference. Test strips can be accurate if used and stored properly.
 

rachel1

Member
Joined
Oct 30, 2012
Messages
465
Reaction score
33
If the instructions said 30 seconds, the reading at 30 seconds will be the most accurate. The pH test strips tend to be ok accuracy wise. The nitrate and nitrite readings are more sensitive to damage from improper storage and exposure to air .
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Shane douglas:
    with axolotls would I basically have to keep buying and buying new axolotls to prevent inbred breeding which costs a lot of money??
    +1
    Unlike
  • Thorninmyside:
    Not necessarily but if you’re wanting to continue to grow your breeding capacity then yes. Breeding axolotls isn’t a cheap hobby nor is it a get rich quick scheme. It costs a lot of money and time and deditcation
    +1
    Unlike
  • stanleyc:
    @Thorninmyside, I Lauren chen
    +1
    Unlike
  • Clareclare:
    Would Chinese fire belly newts be more or less inclined towards an aquatic eft set up versus Japanese . I'm raising them and have abandoned the terrarium at about 5 months old and switched to the aquatic setups you describe. I'm wondering if I could do this as soon as they morph?
    +1
    Unlike
    Clareclare: Would Chinese fire belly newts be more or less inclined towards an aquatic eft set up versus... +1
    Top