Caudata.org: Newts and Salamanders Portal

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Did you know that registered users see fewer ads? Register today!

Apuana juvenile setup

Methos5K

Active member
Joined
Jan 15, 2014
Messages
176
Reaction score
34
Location
Twin Cities, MN
So while in the process of building my new N. crocatus habitat (see thread), I went with the dual tank stand. Why one aquarium when you can have two in the same spatial footprint? :D This tank will be for juvenile I. alpestris apuana. My two pairs have larvae hatching all the time, and some of the older ones are over 1 inch long.

I could either use the area for one 30G breeder, or two 20G tanks. I believe that the 30g would be more beneficial with the increased surface area; but naturally two aquariums have more actual water volume. The parents have always been completely aquatic. One female climbed on top of the cork bark when they first arrived and said "Nope!" and dove back in.:p

I only plan on keeping these animals until they get to a reasonable size to be found new homes. The local school biology teacher wanted a few. I have some members of my Herpetological society interested, and I'd rehome the rest.

What kind of filtration would be best? I must admit, money is not much of a concern. Should I go for a canister filter (with obvious diffused current intake/output), or several of the oldie but goodie air-driven sponge filters? I was going to use a combination of cork bark and water sprite (Ceratopteris thalictroides) for personal flotation devices.

Bare-bottom, with one side loaded with live plants; the other open water to assist in feeding/health checkup. 6500K LED lighting on a 24/7 gradual cycle. Temperature controlled to 65F. Live blackworms flow like water.

Any advice would be much appreciated for this project. Thanks for reading!
 

Chinadog

Super Moderator
Staff member
Joined
May 8, 2013
Messages
2,685
Reaction score
88
Location
Chesterfield, England
I run Eheim cannister filters on my 35 and 75 gallon tanks and would recommend them to anybody. The ecco pro range are especially good for newt tanks because their gentle turnover rate is very easy to diffuse, they need very little maintenance and spare parts are easy to find on ebay if you need them.Having said that I've been using sponge filters on my 17 and 20 gallon tanks for years without any issues at all.
Lately though, I've started fitting UV sterilisers to my tanks to help lower the risk of any diseases spreading into the environment, so I might as well convert the smaller tanks to cannister filters at the same time
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Shane douglas:
    with axolotls would I basically have to keep buying and buying new axolotls to prevent inbred breeding which costs a lot of money??
    +1
    Unlike
  • Thorninmyside:
    Not necessarily but if you’re wanting to continue to grow your breeding capacity then yes. Breeding axolotls isn’t a cheap hobby nor is it a get rich quick scheme. It costs a lot of money and time and deditcation
    +1
    Unlike
  • stanleyc:
    @Thorninmyside, I Lauren chen
    +1
    Unlike
  • Clareclare:
    Would Chinese fire belly newts be more or less inclined towards an aquatic eft set up versus Japanese . I'm raising them and have abandoned the terrarium at about 5 months old and switched to the aquatic setups you describe. I'm wondering if I could do this as soon as they morph?
    +1
    Unlike
    Clareclare: Would Chinese fire belly newts be more or less inclined towards an aquatic eft set up versus... +1
    Top