My first axolotl

Bibie

New member
Joined
Dec 12, 2019
Messages
1
Reaction score
0
Points
0
Location
Roeselare
Country
Belgium
Hello everyone

I'm new here, i've been following this forum for a while now.
I bought my first aquarium for axolotl and it is up and running.
I have bought caviar grit wich is 1mm.
So i hope that is ok?
Because i've read that you cant buy normal grit because that is to Sharp.
I do have a question regarding the temperature.
That is at 14 degrees Celsius.
Should i add a heater or just leave it at 14 degrees?
Because i read that it should be between 14 and 22...
Thanks ;)
 

Kitan

New member
Joined
Nov 13, 2019
Messages
101
Reaction score
4
Points
0
Location
Ontario
Country
Canada
Hi there! Congratulations on your axolotl! So there are a lot of other things to take into account for your tank and 'lotl's care, but if you dont know or have questions, you can just ask :)

I assume caviar grit is sand? If so, what length is your 'lotl? You dont generally want them to have sand until they are at least 5" (so I've been told). As long as they are at least that size, 1mm is a nice size. A big thing with sand is actually the uniformity of the grains to prevent dangerous gasses from building up that can kill your 'lotl. I highly recommend this stuff: https://www.amazon.ca/gp/product/B0...mini_detail?ie=UTF8&psc=1&smid=A3DWYIK6Y9EEQB

14 degrees celcius is just fine. You can have a perfectly happy 'lotl at that temp and do not need a heater. Even if it goes a little colder that's fine. Low is better than high and honestly 22 degrees is too high. You will start experiencing heat stress at that temp as anything over 21 can potentially cause issues.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • MVM1991:
    Nice! Also, from what I can see you have an amazing setup! What species?
    +1
    Unlike
  • jnerdx:
    S. S. Gigliolli
    +1
    Unlike
  • MVM1991:
    Ooo nice!
    +1
    Unlike
  • jnerdx:
    Thank you! I tried to share the video but unsuccessful. You can see it on my IG story @jnerdx
    +1
    Unlike
  • MVM1991:
    Cool! I just have a tiger and a long tail, who we are trying to find as he ESCAPED INTO MY ROOM!
    +2
    Unlike
  • LauraLobster:
    Hey y'all, recently my juvenile axolotl's tail has been floating and can swim down but his tail lifts to an angle and I believe that it is stressing him out. He gets in between his plants to balance himself and I am cleaning out the bottom of the tank with my baster. I believe I overfed him and he also may have eaten many air bubbles. He's been like this for nearly 1 1/2 days.
    +1
    Unlike
  • LauraLobster:
    What would be the best thing to do ?
    +1
    Unlike
  • Chat Bot:
    Redear has joined the room.
    +1
    Unlike
  • Mark.H:
    Hey, does anyone know if hot glue is fine to glue rocks together?
    +1
    Unlike
  • MVM1991:
    Should be. Hot glue is good when dry I believe, just don't let it get too hot and you should be good. Most super glues are good as well just watch out for flume warnings
    +2
    Unlike
  • Mark.H:
    Ok, thanks! I am going to glue together the shale I mentioned.
    +1
    Unlike
  • Kwags:
    hello, I am currently tubbing my axolotl due to cycling the tank. I have read different answers on how many times to do a 100% water change a day when tubbing. Some say once and some say twice. I just want to actually ask and get answers for myself. Thank
    +1
    Unlike
  • Murk:
    As often as you need to keep the water clean! Since you´re cycling, I assume you have a test kit. Just test a few times to see how long it takes for your ammonia to go up, and as soon as it does, change the water.
    +2
    Unlike
  • Kwags:
    Yes,I have the master test kit. Thank you! So just test the water in the tub that my axolotl is in now to gauge off of for changing?
    +1
    Unlike
  • Murk:
    That´s the most accurate. Depends on the size of the tub etc. - you just want to make sure the water is always clean
    +1
    Unlike
  • Kwags:
    When little axolotls are tubbed is it common for them to get a little more spunky then usual? Water temps around 64-65 F and has been changed today with prime added
    +1
    Unlike
  • Murk:
    Uh. That depends on your definition of "spunky"?
    +1
    Unlike
  • HalfDrunkToast:
    @Kwags, how big?
    +1
    Unlike
  • HalfDrunkToast:
    my baby hes tubed and hes a wild child xD
    +1
    Unlike
  • Kwags:
    Swimming like crazy. A little more pep in his step. I think about 3 inches.
    +1
    Unlike
  • faebugz:
    Hi does anyone know if jungle fungus clear is safe to use for my axolotl? She has some either fungus or bacterial growth on her fillibrae and maybe body and I read that's good to use if you aren't sure if the problem is bacterial or fungal
    +1
    Unlike
  • EasternRomioi3:
    I have not heard of that before.
    +1
    Unlike
  • EasternRomioi3:
    That jungle fungus clear. I've been dealing with some fungus with my axolotl on and off this summer. The Holtsfreter solution and water changes just seem to do the trick after a bit
    +1
    Unlike
  • faebugz:
    Where do you get the holtsfreter solution? I've been upping water changes but salt bath seems to be more stressful/harmful than beneficial because she does not like to be caught!
    +1
    Unlike
  • Slash-GNR:
    Anyone know how to harden soft water without raising pH?
    +1
    Unlike
    Slash-GNR: Anyone know how to harden soft water without raising pH? +1
    Top