Slightly curved tail

speckle

New member
Joined
Oct 20, 2009
Messages
19
Reaction score
0
Points
0
Country
Australia
Hey all,

Was just reading a few threads and I know that a curved tail is a sign of stress, but how much is it curved to be caused be stressed? I've had my axolotl for a bit over a week and their tails seems to be curving to the left slightly. I'm wondering if its due to stress or just normal curvature. He seems to like sitting next to the plants and curving his tail around them.

I'm thinking it may have something to with ammonia levels so I am going to get a test kit in few days but i changed the water today (had to change from gravel, which the pet shop told me was ok size but turned out it wasnt, fine sand) and added dechlorinator, ph leveler and a water conditioner which is meant to "re-create natural conditions in your aquarium" and contains "correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors". Also the water is around 18 degrees, but i do have to keep cycling with water bottles as it's been fairly hot here all week.

Thanks, Sam =)
 
When the very tip of an axolotl's tail is curled or kinked, this means the animal is stressed.

Is it eating?

Without knowing your water parameters, it is really difficult to gauge what the problem could be (assuming there is one).

What is the pH of your tap water? Chemicals to alter pH are usually not necessary and can cause more problems than they solve.

If your axie is simply sitting with his tail curled around plants, decorations, and such, it's quite possible there isn't a problem at all.

Cheers.
 
I just tested the water and the results were:
General Hardness - 13 (german)
Carbonated Hardness- 8 (german)
Chlorine - 0.6 (not sure what unit)
Bromine - 1.3 (not sure what unit)
pH - 8.0
Nitrite - 0.3mg/L
Ammonia - 0mg/L (I think)
Carbon dioxide - 2,4 (what the chart says, but its assuming the water is at 25 degrees C and mine is at 18 degrees C)

Also, i have newcastle beach sand in my tank, I was just told by another member that this type of sand is bad because it can contain limestone. Is this right?? Could this be stressing my axolotl. If so, can I test for and remove limestone or do I need to get new sand?? I only put the sand in the tank yesterday.

Also, I don't think it's the filter current as my tank in 20L and the filter can go up to 40L and when I bought filter I was told that the currents would not be an issue.
 
Also yes, speckles is eating. He had 4 axolotl pellets saturday, two yesterday and one so far today. I've tried to feed him frozen blood worms but I'm not sure how to go about it... I'm also going to try some earthworms soon as my nan has them and i'm pretty sure they don't use any chemicals on them.

I can upload some photos of the tail if you would like.

thanks, Sam =)
 
What type of test kit are you using?
 
What type of test kit are you using?
"tetratest laborett water test for freshwater and marine aquariums" for all but chlorine/bromine which didnt come in kit. the chlorine/bromine was just a pool test kit we have at home. im going to look for a proper one soon.
all the reactions are based on colour changes (except for carbon dioxide which was based on pH and carbonated hardness) so its a bit hard to tell for the ones that depend on colour chart i.e. pH, nitrite, cholrine/bromine and ammonia
 
Thats quite a good professional kit. I was just asking because i never heard of an aquarium water test kit that test routinely for bromine and chlorine. There is no necissity for test for these two though (provided you use a good dechlorinator).
 
ah ok, i do have a dechlorinator, just with rotating the ice bottles i was worried that i may have affected the chlorine balance and stressed speckles out.

so are all the parameters good? or is pH a bit too high??

also, is the limestone in the sand going to be an issue??

thanks =)
 
The limestone can cause increased alkalinity in the water (high pH). Axies fortunately can tolerate pH from 6.5-8. Ideally, neutral 7 is best.
 
The limestone can cause increased alkalinity in the water (high pH). Axies fortunately can tolerate pH from 6.5-8. Ideally, neutral 7 is best.

so as long as i keep the pH at around 7 the fine beach sand will be ok?? YAY!! :D

thanks soo much for you help =) =)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
    There are no messages in the chat. Be the first one to say Hi!
    Back
    Top