spiro666
New member
- Joined
- Jun 29, 2008
- Messages
- 47
- Reaction score
- 1
- Points
- 0
- Country
- United States
- Display Name
- Spiro!
So I have been reading on this forum about a problem I was having with my Axolotl. I believe the Ammonia levels in his tank spiked last week. The tank is a 40 gallon breeder that only has 30 gallons of water in it. I had a 96 Watt PC bulb over for plant growth and a Ecco 2232 canister filter with a full spray bar along the back current control. This was also supplemented with a small pump pointed to the surface for tension release. The tank was heavily planted with a 1 inch sand bed. The only other animal was a single guppie. The only dosing I did was with "FLOURISH excel" once a week.
I was doing nothing different than I have been doing in the last 9 months since I got him although the aquarium has only been set up since I believe July. But I noticed when I was feeding him some salmon pellets that one of his gills started bleeding a good amount. This worried me so I read about it and started treating the tank for ammonia the next day via 10 gallon water changes every other day for about a week. I removed all the plants and left only the rock. I also purchased a 8 Watt UV sterilizer that I mounted on the side of the stand and hooked up to the ecco filter. I purchased SuperBac Nitrifying bacteria as well and this leads me to my questions:
He is still acting funny (loss of appetite, squirming and chasing his tail) the bleeding has stopped but could this be due to something else?
I read about "over filtration" and I feel as the the UV sterilizer and the Ecco might be keeping the water "too clean"?
The nitrifying bacteria might be a good option but I have to turn off my UV sterilizer (4 to 5 days)for it to take effect?
I am trying to be a good parent to this little guy but I am failing pretty bad apparently.
So any suggestions on what I can do to not just temporarily solve this but for the long run as well would be so great
Sorry about the long email and thanks so much for reading.
ps. pictures of my tank are in the axolotl gallery called "Badtz Maru tank 2.0" last post was August 17th 2009. Good idea of what the tank looked like but the plants were much smaller there then they were last week.
I was doing nothing different than I have been doing in the last 9 months since I got him although the aquarium has only been set up since I believe July. But I noticed when I was feeding him some salmon pellets that one of his gills started bleeding a good amount. This worried me so I read about it and started treating the tank for ammonia the next day via 10 gallon water changes every other day for about a week. I removed all the plants and left only the rock. I also purchased a 8 Watt UV sterilizer that I mounted on the side of the stand and hooked up to the ecco filter. I purchased SuperBac Nitrifying bacteria as well and this leads me to my questions:
He is still acting funny (loss of appetite, squirming and chasing his tail) the bleeding has stopped but could this be due to something else?
I read about "over filtration" and I feel as the the UV sterilizer and the Ecco might be keeping the water "too clean"?
The nitrifying bacteria might be a good option but I have to turn off my UV sterilizer (4 to 5 days)for it to take effect?
I am trying to be a good parent to this little guy but I am failing pretty bad apparently.
Sorry about the long email and thanks so much for reading.
ps. pictures of my tank are in the axolotl gallery called "Badtz Maru tank 2.0" last post was August 17th 2009. Good idea of what the tank looked like but the plants were much smaller there then they were last week.