aqarium chillers

issac NEWTon

New member
Joined
Mar 2, 2008
Messages
41
Reaction score
0
Points
0
Country
United States
where can i get an aqarium chiller and how much would one cost?
 
That depends what your looking for really. What kind of setup? How much do you need to drop the temperature?

Personaly I find computer fans mounted in my cutom made hoods provide enough cooling - obviously depends on ambient temperature though.
 
during a hot day one of my tanks can reach 75 degrees F. and sometimes 76, the water is 6in. deep and the tank is mostly water. its for c. o.'s and iwant below 70. nomally the tank is 70, but summers coming again and i want to be prepared.
 
Similar situation to myself. I'm in the process of building a new custom hood housing 4 computer fans(just simple, plain, low noise case fans). I find between those and ice bottles on really hot days I can keep the temperature in acceptable ranges.

Wiring is very safe and simple, I can talk you through if you like.
 
Similar situation to myself. I'm in the process of building a new custom hood housing 4 computer fans(just simple, plain, low noise case fans). I find between those and ice bottles on really hot days I can keep the temperature in acceptable ranges.

Wiring is very safe and simple, I can talk you through if you like.

I have bought a reef fan which I got online, but also I have seen them in aquariums. It is very similar to the computer fans technique, actually I think thats what they are. But at the moment I might have to use another technique because now the days are warming up in England the temperature in the tank is starting to shoot up. It is around 19 degrees as we speak and the fan has been on constantly.
 
i use the ice bottle method as well, first of all where can i get computer fans and how much do they cost, and yes i would like to know how you do it.
 
You can buy 12v fans quite cheaply online, as little as a couple of quid(4 or 5 dollars?).
Once you have your fans you'll also need a 12v DC adaptor(I would note I'm in the UK, I'm aware the supply over the US is different so you should check things about before hand), variable adaptors and mobile phone chargers work perfectly and can be picked up quite cheaply.

Take your adaptor, and cut off whatever kind of jack it has. You should see two wires which you'll need to strip down.
The computer fans should have a 3 pin adaptor(to plug into the power supply), chop it off. Your left with 3 wires, usualy red, yellow and black. You can remove the earth entirely, its not used(usualy black). The remaining two wires are your live and neutral which you need to splice directly to those on the adaptor. Its DC current so the fan will only work if you get them the right way around. Connect them however you please, firmly twisting them together and wrapping in electrical tape works, or you can use a conector.
In either case, its probably a good idea to wrap everything thoroughly in electrical tape if your putting it in a damp environment.

You can run 3 or 4 fans off the one adaptor if you connect them in parallel.

Time depending I intend to post a 'hood construction journal' with photo's as a couple of people have asked about my hoods(which are REALLY simple) when I get round to making it in a week or two
 
thanks. im assuming that the "earth" is the grounded wire.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
    There are no messages in the chat. Be the first one to say Hi!
    Back
    Top