Gills..

zoe

New member
Joined
May 25, 2010
Messages
34
Reaction score
1
Points
0
Country
Australia
I just noticed about five minutes ago that my axolotl's gills on one side are pretty much white. I've attached a photo, I have no idea if it's anything or not but would appreciate some expert opinions
(photo is terrible quality i had to use my phone)
 

Attachments

  • 001.jpg
    001.jpg
    114.3 KB · Views: 351
First of all you will need to get rid of that gravel!! You can replace it with childrens play sand from Bunnings or a barebottomed tank or go arty and put some slate tiles down.

As for the gills, my golden looks like that on all of his gills, it isn't fungus but colouring. Just to be sure of yours though could you get a better picture? or tell me if it looks like cotton?

I will also needs your tanks size, temperature, diet, has it been cycled? what are its parameters? and does the tank have any hides? A full picture of the tank will answer some of the tank questions.


Blaze.
 
Currently waiting for sand in the new tank to settle. Unfortunately i bought him without proper research so i am aware that his tank is entirely unsuitable. As soon as the water in the new tank has cleared more i'll be putting him in there to start my cycle as the source of ammonia. Hopefully this should he within the next few days
 
Is the white spots just on the branches of the gills or also on the filaments?
 
Ah okay, better soon though as it only takes one split second gulp and he could die unfortunetly.

Yes good point GWH.
 
i think there are a couple of tiny little bits of white stuff on them. thats the red stringy stuff right?
 
yup thats pretty much exactly it.
i've put him in the new tank btw i tested the parameters and everything was fine except the ammonia so i detoxified it with stress coat and put a bit more water in. he's walking around exploring and leaving cute little footprints everywhere :D
 
What is that Blaze? My girl has a little of that going on as well, something I should be overly concerned about?
 
awww cute! Just be careful with that stress coat as it ends up coating all your walls, filter and ornaments in a slimy film!

It's just part of Sunnys colouring. If I look at it on the right angle is very shiny. As long as it doens't look like cotton it should be okay! I havn't had any troubles with it.
 
Last edited:
will stress coat really sort out the ammonia? asking as ive been trying to cycle my 4ft tank for awhile now and my ammonia been at 0.25 it turns out i have ammonia in my tap water will have to try stress coat :happy:
 
Again I will highly advise against stress coat! There have been threads by members here that have had to completely empty the tank and start again due to a yucky slimy coat over everything.
 
Please take Blaze's advice about the Stress Coat. Either Prime or AmQuel+ (if avail.?) would be a much better choice. Stress coat should not be used on a regular basis as it does put a "slime" on EVERYTHING...
 
ive seen afew post on here about stress coat and stayed away from it as my axolotls are all still young some just babies i didn't want to risk it, i cant get my ammonia down to 0. its always on 0.25
so every time im doing water changes im just adding more, its in my tap water.
i will hunt for the prime or the amquel + not come across them in a pet shop here will look on ebay thanks :happy:
 
Water de-chlorinaters such as Stress Coat, Novaqua, etc have ZERO effect on your ammonia levels.
 
That's why I recommended Prime and AmQuel+ by name. I have .25 ammonia in my tap as well.
 
As Mariah said, dechlorinators will have no effect on your ammonia. They get rid of chlorine and Chloramine and some other heavy metals that might be present in your water. If the ammonia is in your tap water you may have to get a water tank that catches the rain or start buying bottled water which can unfortunetly get expensive.
 
Another -1 here for stresscoat, I was using it in my small tank and yes, after a few doses found that the entire tank, plants, walls, substrate, filter, everything was covered in this odd white filmy stuff so after doing a bit of reading here picked up a simple dechlorinator and haven't had the trouble since.
 
Some basic dechlorinators do not handle ammonia. However, picture speaks for itself and Prime will do the same thing.
 

Attachments

  • P6090009.jpg
    P6090009.jpg
    67.1 KB · Views: 278
General chit-chat
Help Users
  • No one is chatting at the moment.
    There are no messages in the chat. Be the first one to say Hi!
    Back
    Top