How to attach structured background?

evut

Active member
Joined
Apr 24, 2009
Messages
978
Reaction score
66
Points
28
Location
Hertfordshire, England
Country
Czech_Republic
Display Name
Eva
Hi, I'm setting up a new tank an got a structured background for it
JUWEL Aquarium Homepage
All the instructions say is something like attach with silicone...
I'm wondering if it is necessary to seal this type of background around the edges?
It's in one piece and the right size for the tank. The thickness is about 1cm and the back if flat.
Also, once attached, is it possible to remove the background and the silicone again?
Thanks for your help!
 
If this background creates a tight fit then you really don't need to silicone it in place or the edges. (although it is nice to have that added security).

When/if you use silicone then you might as well plan on that background becoming a permanent fixture of the tank because it is very difficult to remove without damaging the tank or glass.

Will this be used in a terrestrial or aquatic setup? If it is goung to be used in a terrestrial setup then you can roll up a couple pieces of duct tape and use that to attach it to the glass, this has the added benefit of being removeable.
 
Hi, thanks. It's for an aquatic set-up. Someone on another forum actually recommends avoiding the aquarium corners when attaching the background so that it can be removed easily if you change your mind. I'd like to keep my options open so I'll attach it without sealing the edges. The tank will be set up and running for some time before the newt goes in so I will be able to see if it's good or not.
 
use CLEAR silicone. if you decide to remove it you can peel silicone off (if you use it conservatively atleast) and once you peel it off you'll have to use a razor blade to scrape the excess off. (very carefully) i made the mistake of using black silicone in one of my tanks and i've never been able to scrape it all off now that i removed it. also make sure its 100% silicone or "aquarium safe" silicone and not some kind of cauk mixture.
 
Hi, thanks. The silicone I used is clear and the company that makes it (Geocel) also makes a remover. The background is now attached and the silicone is drying. I think it will look good so I hopefully won't be getting rid of it any time soon :)
 
I admit I cheat.

For backgrounds such as these I use Velcro adhesive tape, the two part kind. It is water proof, mold proof, easy to change out your background and free of anything that may contaminate your tanks in the future.

I stick the hook strips to the back of the enclosure and stick the loop strips to the back of the background. If you run the velcro around the edges of the background and the tank wall, you now have a barrier that keeps your pets and their food from getting in behind it too.
 
Wow, that's a great idea. I've used the silicone now but will keep this in mind for the next set-up. I've actually used Velcro for lids from net fabric. Great stuff!
 
General chit-chat
Help Users
  • No one is chatting at the moment.
    There are no messages in the chat. Be the first one to say Hi!
    Back
    Top